Epoxy flake floors
100% solids epoxy base, full flake broadcast, polyaspartic topcoat. A thicker build at a lower price point. Installed across Greater Cleveland.
Price this floorAn epoxy flake floor uses a thick 100% solids epoxy base coat, a full broadcast of color flake, and a polyaspartic topcoat. The epoxy base builds more thickness in a single coat, which helps fill minor surface wear on older slabs.
It takes longer to cure than a full polyaspartic system, so plan on keeping cars out for about three days. In return it costs less per square foot.
- Best for
- Garages, workshops
- Back in use
- Walk in 24 hours, park in 72
- Warranty
- 1 year
What goes down
- Diamond grind and repair the slab
- 100% solids epoxy
- Color flake
- Polyaspartic topcoat
What it costs
Price depends on size and on what the slab needs before coating. Get a budget range online, then book a short on-site inspection for your exact, written price. Typical ranges by space.
Questions about epoxy flake
What does 100% solids epoxy mean?
It contains no solvent or water that evaporates away, so the thickness we apply is the thickness that stays on your floor.
Why put a polyaspartic topcoat on an epoxy floor?
Epoxy alone can yellow in sunlight and scratches more easily. A polyaspartic topcoat protects the color and adds abrasion and chemical resistance.
Other systems
Epoxy flake floors we have done
Sponsored